Have you always wanted to modernize your proven Grundig Dialog 4 / Deckel Dialog 4 control, but found a complete retrofit too expensive? Our NC-HUB software solution offers the optimal way to continue using your existing control without having to miss out on modern tools.

Core Features for your Workflow

  • Independent Workspace: The embedded computer is mounted directly to the Dialog 4 and connected to the control via an RS232 cable. The controller can easily be integrated into your company network via Wi-Fi or LAN. Operation can then take place comfortably from any device. Custom-tailored roles for administrators and operators are already built-in.
  • Intelligent G-Code Editor: Real-time syntax highlighting, live error checking, and an integrated snippet library. Prevent errors before they ever reach the machine.
  • Advanced 3D Simulation: Hardware-accelerated 3D rendering right in your browser. Set blank sizes and zero points easily using G-code comments.
  • Live Debugger: Track exactly which line of code is being processed in real time while the 3D simulation accurately visualizes each individual step.
  • Direct Machine Communication: Send verified programs directly to the CNC machine via the serial interface. For large programs, a reliable DNC drip-feed mode is also available.

Sequence Builder: Automate Your Routine Work

With the new Sequence Builder, you can easily structure and process repetitive tasks. It supports a variety of milling and hole cycles:

Milling Cycles

  • Wall Facing (Squaring): Mill specific walls to square stock to final dimensions.
  • G71 Rectangular Pocket: Climb or conventional rectangular pocket milling.
  • G72 Rectangular Pocket: Standard rectangular pocket milling.
  • G72*1 Programmable Corner: Rectangular pocket with a programmable corner radius.
  • G73 Pocket Finishing: Rectangular pocket finishing cycle.
  • G74 Pocket Finish w/ Stop: Rectangular pocket finishing with a programmed stop.
  • G75 Boss Milling: Circular or rectangular boss milling.
  • G76 Circular Pocket: Circular pocket milling.
  • G77 External Thread: External thread milling.
  • G78 Internal Thread: Internal thread milling.
  • G79 Contour Pocket: Contour pocket milling.

Hole Cycles

  • Drill Pattern - Circle: Drill holes along a circular pattern (dynamically outputs G81/G82/G83 depending on depth).
  • Drill Pattern - Raster: Drill holes along a rectangular grid pattern (dynamically outputs G81/G82/G83).
  • Helix Milling (G78): Helix milling cycle.
  • G81 Standard Drilling: Standard drilling cycle.
  • G82 Chip Breaking: Deep hole drilling with chip breaking.
  • G83 Peck Drilling: Deep hole peck drilling.
  • G84 Tapping: Thread tapping cycle.
  • G85 Reaming: Reaming cycle.
  • G86 Boring: Boring cycle.
  • G87 Point Pattern: Point pattern setup for drilling cycles.
  • G88 Bolt Hole Circle: Bolt hole circle setup for drilling cycles.

NC-HUB is built to give you total confidence in every cut. Program smarter, simulate perfectly, and machine with precision.